B02026.jpg

Description

Purpose:
The center connector connect both milled bars with the drilled one in one stable crossbar.

Material:
PA, non-mixed material of prime quality only

Fogging test 1279-4:
by MPA Darmstadt

Protection by patent:
Design protected by CERA property rights.

Storage:
All CERA products have to be stored in original packaging, kept dry and protected from UV radiation. Storage temperature must not be less than +10° C.

Storage life/durability:
CERA products have no expiration date, if properly stored.

Handling:
To form the crossbar, the center connection is inserted through the middle of the notched out profile. Then both milled bars should be put over the center connector up to the stop.

Processing instructions:
The CERA items stated below are only to be installed in the same spacer width as shown in the line of the size measurement table. After assembly, thermal endurance up to +110° C is possible, but only if no additional load occurs.

Environmental sustainability:
safe to use and represents no health hazard, completely recycable

Specifications

Material PA
Profile type Aluminium
L - H 2610
System Solutions Center Connector
Color grey
SZR 15161820
Back to: Muntin Bar 76