Purpose:
Secure closure during manual gas filling.
Material:
PA, non-mixed material of prime quality only
Fogging test 1279-4:
by MPA Darmstadt
Protection by patent:
Design protected by CERA property rights.
Storage:
All CERA products have to be stored in original packaging, kept dry and protected from UV radiation. Storage temperature must not be less than +10° C.
Storage life/durability:
CERA products have no expiration date, if properly stored.
Handling:
After filling with the probe, the plug is pressed into the sleeve resp. into the drill hole of the gas corner key. The flag is pushed to the side. This causes the flag to break at the predetermined breaking point above the closure. The glass pane can then be sealed cleanly.
Processing instructions:
The CERA items stated below are only to be installed in the same profile drill hole resp. spacer width as shown in the line of the size measurement table. After assembly, thermal endurance up to +110° C is possible, but only if no additional load occurs.
Environmental sustainability:
safe to use and represents no health hazard, completely recycable
| Material | PA |
|---|---|
| Profile height | 8,0 mm |
| Profile type | WarmEdgeAluminiumStainless steel |
| System Solutions | Gas fitting |
| System properties | Plug |
| Color | grey |
| SZR | 81011121314151618202224 |
CERA GmbH
Gewerbepark-Fürgen 14
D-87674 Ruderatshofen
Tel: +49 8342 9694-0
info@cera-gmbh.com
CERA office hours
Mo.-Thu.: 07.00 am to 4.15 pm
Fri.: 07.00 am to 12.00 noon





