Description

Purpose:
Connecting component for insulated glass unit production.

Material:
PA, non mixed material of prime quality only. The CERA sealing application (based on PU foam) is applied to the bridge of the Fusion connector which prevents desiccant getting through and reduces gas loss during production. The sealing application can be processed as bulk goods and can be processed temporal unlimited.

Fogging test 1279-4:
by MPA Darmstadt

Protection by patent:
Design protected by CERA property rights.

Storage:
All CERA products have to be stored in original packaging, kept dry and protected from UV radiation. Storage temperature must not be less than +10° C.

Storage life/durability:
CERA products have no expiration date, if properly stored.

Handling:
The two ends of bar are joined by using the CERA Fusion connector. The CERA Fusion connector is inserted manually into one of the ends of the spacer bar with the connector's open side showing towards the spacer bar's back. The connector may not be inserted further than to the centre fin. It must be ensured that the cutted ends are clean and free from swarf. Joining the frame completely, insert the other side of the connector into the other, open end of the spacer bar. The joint is not to be opened again.

Processing instructions:
The CERA items stated below are only to be installed in the same spacer width as shown in the line of the size measurement table. After assembly, thermal endurance up to +110° C is possible, but only if no additional load occurs.

Environmental sustainability:
safe to use and represents no health hazard, completely recycable

Specifications

Material PA
Profile type WarmEdge
System Solutions Connector
System properties Fusion-Connector
Color black
SZR 14
Back to: MULTITECH