Purpose:
The edge key is used to fix the cross connector in the spacer frame.
Material:
PE, non-mixed material of prime quality only
Fogging test 1279-4:
by MPA Darmstadt
Protection by patent:
Design protected by CERA property rights.
Storage:
All CERA products have to be stored in original packaging, kept dry and protected from UV radiation. Storage temperature must not be less than +10° C.
Storage life/durability:
CERA products have no expiration date, if properly stored.
Handling:
The edge key is inserted in the clean and burr-free bar. Once the bar is attached to the spacer frame, the edge key is screwed or stapled to it from the spacer's back.
Processing instructions:
The CERA items stated below are only to be installed in the same spacer width as shown in the line of the size measurement table. After assembly, thermal endurance up to +110° C is possible, but only if no additional load occurs.
Environmental sustainability:
safe to use and represents no health hazard, completely recycable
| Material | PE |
|---|---|
| Profile type | WarmEdge |
| L - H | 21,5 x 9,5 |
| Bore ⌀ | 2,15 mm |
| System Solutions | Edge Key |
| System properties | for staplingfor screwing |
| Color | translucent |
| SZR | 121314 |