Purpose:
The cross connector forms the middle connection of the window bars.
Material:
PA, non-mixed material of prime quality only
Fogging test 1279-4:
by MPA Darmstadt
Protection by patent:
Design protected by CERA property rights.
Storage:
All CERA products have to be stored in original packaging, kept dry and protected from UV radiation. Storage temperature must not be less than +10° C.
Storage life/durability:
CERA products have no expiration date, if properly stored.
Handling:
The Duplex window bar is cut in a proper 90° angle. The bar is then pushed onto the cross connector to the stop. It must be ensured that the bar is free from burrs. The integrated dampener centers the cross connector within insulated glass sealed units.
Processing instructions:
The CERA items stated below are only to be installed in the same spacer width as shown in the line of the size measurement table. After assembly, thermal endurance up to +110° C is possible, but only if no additional load occurs.
Environmental sustainability:
safe to use and represents no health hazard, completely recycable
| Material | PA |
|---|---|
| Profile type | WarmEdge |
| L - H | 21,5 x 11,5 |
| System Solutions | Cross Connector |
| System properties | with integrated dampener |
| Color | grey |
| SZR | 15161820 |