01705.jpg

Description

Purpose:
Connecting component for insulated glass unit production.

Material:
PA, non-mixed material of prime quality only

Fogging test 1279-4:
by MPA Darmstadt

Protection by patent:
Design protected by CERA property rights.

Storage:
All CERA products have to be stored in original packaging, kept dry and protected from UV radiation. Storage temperature must not be less than +10° C.

Storage life/durability:
CERA products have no expiration date, if properly stored.

Handling:
The two ends of a spacer are joined by using CERA corner keys. The CERA corner key is inserted manually into one of the ends of the spacer bar. The key may not be inserted further than to the key's stop bar. It must be ensured, that the cutted ends are clean and free from swarf. Joining the frame completely, insert the second leg of the key into the other, open end of the spacer. The joint is then not to be opened again.

Processing instructions:
The CERA items stated below are only to be installed in the same spacer width as shown in the line of the size measurement table. After assembly, thermal endurance up to +110° C is possible, but only if no additional load occurs.

Environmental sustainability:
safe to use and represents no health hazard, completely recycable

Specifications

Material PA
Profile type Aluminium
System Solutions Corner Key
System properties 90°
Color grey
SZR 6
Back to: Aluminium AluPro